ASSR-601J

1500V Solid State Relay

ASSR-601J.jpg
ASSR-601J.jpg

  • Compact solid-state bidirectional signal switch
  • Breakdown voltage, BVOFF: 1500 V at IDSS = 250 μA
  • Output Leakage Current, IO < 1 μA at VO = 1000 V
  • Operating temperature range: –40° C to +110° C

The ASSR-601J is a high-voltage solid state relay that is designed for high voltage industrial applications. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high-voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 10 mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.4V or less. The ASSR-601J is equivalent to 1FormA Electromechanical Relays (EMR) and is available in 16-pin SOIC package.  

 

Expand All
  • Compact solid-state bidirectional signal switch
  • Operating temperature range: –40° C to +110° C
  • Breakdown voltage, BVOFF: 1500 V at IDSS = 250 μA
  • Avalanche rated MOSFETs
  • Output Leakage Current, IO < 1 μA at VO = 1000 V
  • On-resistance, RON < 250Ω at IO = 50 mA
  • Turn on time: TON < 4 ms
  • Turn off time: TOFF < 0.5 ms
  • Package: 300 mil SO-16
  • Creepage and clearance ≥ 8 mm (input-output)
  • Creepage > 5 mm (between drain pins of MOSFETs)
  • Safety and regulatory approvals:
    • IEC/EN/DIN EN 60747-5-5
    • Maximum working insulation voltage 1414VPEAK
    • 5000VRMS for 1 minute per UL1577
    • CSA component acceptance
  • Battery/motor/solar panel insulation resistance
  • measurement/leakage detection
  • BMS flying capacitor topology for sensing batteries
  • Electro mechanical relay replacement
  • Inrush current limiter protection