- Automotive Qualified per AEC-Q100 Grade 1 Test Guidelines
- 3.3/5V CMOS Output
- Data Rates up to 15 MBd
- Low Propagation Delay: 35 ns (max)
The Broadcom AC FL-6211x/6212x family is an automotive-grade, dual-channel optocoupler device designed for bi-directional digital communications. It has two optocoupler channels internally aligned 180 degrees of each other, providing optimum chip pin-out configuration for bi-directional Tx/Rx data communication design and board layout. The two channels are electrically independent and galvanically isolated, providing an ideal isolated bi-directional power system communication interface.The device is optimized for high-speed systems supporting data rates up to 15 MBd.
- Automotive Qualified per AEC-Q100 Grade 1 Test Guidelines
- Operating Temperature from -40 °C to +125 °C
- 5V CMOS Output
- 8mm Creepage and Clearance
- Data Rates up to 15 MBd
- LED Current Drive (IF): 4 to 15 mA
- Low Propagation Delay: 35 ns (max)
- Vcc Range: 3 to 5.5 V
- Compact, Auto-Insertable Stretched SO12 Package
- Worldwide Safety Approval:
- - UL 1577 approval, Viso = 5,000 Vrms for 1 min.
- - CSA Component Acceptance Notice 5
- - IEC 60747-5-5, EN/DIN EN 60747-5-2, Viorm = 1,140 Vpeak
- Automotive CANBus and SPI Communications Interface
- Automotive Power Transitor Isolation
- High Temperature Digital Signal Isolation
- Automotive IPM Driver for DC/DC Converters
- Digital Isolation for A/D and D/A Conversion